How Much Does It Cost to Replace Chimney Flashing in Texas? [2025 Guide]

How Much Does It Cost to Replace Chimney Flashing in Texas?
August 26, 2025

You’ve just noticed water stains creeping along your ceiling near the fireplace. After a heavy Texas rainstorm, the damp spot spreads quickly. Many homeowners think of shingles when it comes to roof leaks—but often the culprit is chimney flashing.

Chimney flashing is the thin sheet metal installed where the chimney meets the roof, and its job is simple: keep water out. When flashing fails, water seeps into your attic, walls, and ceiling, causing hidden damage that gets expensive fast.

If you’re wondering, “How much does it cost to replace chimney flashing in Texas?” you’re not alone. At Pete’s Builders, we help homeowners across Dallas, Fort Worth, Houston, Austin, and San Antonio understand the true costs of flashing replacement—and how the right repair saves thousands in long-term roof damage.

This guide breaks down the average chimney flashing replacement cost, factors that affect price, regional differences across Texas, and why professional replacement is worth the investment.


Why Chimney Flashing Matters

Your chimney is one of the most vulnerable points on your roof. Without proper flashing:

  • Rainwater finds its way under shingles and into the attic.
  • Wood structures rot over time.
  • Mold and mildew develop, creating health risks.
  • Fireplaces and chimneys become unsafe.

In Texas, where storms roll in suddenly and roof systems face scorching summers, flashing wears out faster than in many other states. A well-installed chimney flashing protects your roof and gives you peace of mind.


Average Cost to Replace Chimney Flashing in Texas (2025)

The average cost to replace chimney flashing in Texas ranges between $300 and $1,200, depending on material, roof pitch, and labor. Emergency repairs after a storm may cost more.

Here’s a cost snapshot:

Type of Chimney Flashing RepairAverage Cost in TexasNotes
Minor flashing repair$150 – $400Patchwork or partial fixes
Full chimney flashing replacement$300 – $1,200Includes new materials & labor
Lead flashing replacement$500 – $1,500More durable, higher cost
Emergency storm repair$800 – $2,000+Urgent, after severe weather

⚠️ Keep in mind: Ignoring damaged flashing today could mean a full roof replacement tomorrow.


Factors That Affect the Cost to Replace Flashing Around a Chimney

  1. Material Choice
    • Aluminum: Affordable ($300–$600) but less durable.
    • Copper: Premium look, lasts 30+ years ($900–$1,500).
    • Lead: Long-lasting, mid-range price ($500–$1,500).
    • Galvanized Steel: Common and affordable, shorter lifespan.
  2. Roof Pitch & Accessibility
    Steeper roofs in areas like Austin Hill Country or Houston suburbs require extra safety equipment and labor, increasing costs.
  3. Chimney Size & Design
    Larger chimneys with multiple flues or unique designs require more flashing material and labor.
  4. Labor Costs in Texas Cities
    • Dallas & Fort Worth: $65–$85 per hour (average roofing labor).
    • Houston: $70–$90 per hour.
    • Austin & San Antonio: $60–$80 per hour.
  5. Emergency vs. Scheduled Repair
    Storm damage repair (common in Texas spring and fall seasons) often costs 20–40% more due to urgency and demand.

Signs You Need Chimney Flashing Replacement

How do you know it’s time to replace your flashing? Look for these signs:

  • Water stains near your fireplace or chimney wall.
  • Visible rust, cracks, or missing sections of flashing.
  • Leaks after heavy rain or wind.
  • Moldy smell in the attic.
  • Loose bricks or deteriorating mortar around the chimney base.

If you spot any of these, call Pete’s Builders for a professional inspection.


DIY vs. Professional Chimney Flashing Replacement in Texas

DIY Replacement

  • Materials: $100–$300.
  • Risk: High—improper installation leads to leaks, voided warranties, and safety hazards.

Professional Replacement

  • Cost: $300–$1,200.
  • Benefits: Warranty-backed work, code compliance, and long-lasting protection.

In Texas’s unpredictable climate, professional replacement always pays off.


How Often Should Chimney Flashing Be Replaced?

  • Lifespan: 15–20 years under normal conditions.
  • Texas Reality: Due to storms, heat, and humidity, flashing may need replacement every 10–15 years.
  • After hailstorms or hurricanes, immediate inspection is recommended.

Local Cost Estimates Across Texas

  • Dallas & Fort Worth: $350 – $950
  • Houston: $400 – $1,100
  • Austin: $300 – $900
  • San Antonio: $325 – $950
  • Coastal Texas: Higher due to salt corrosion and storm exposure ($450 – $1,200)

Local experience matters—Pete’s Builders has roofing teams across Texas familiar with city-specific building codes and insurance requirements.


Why Choose a Local Roofing Company Like Pete’s Builders

  • We know Texas weather patterns and roofing systems.
  • Licensed, insured, and trusted across Dallas, Fort Worth, Houston, Austin, and San Antonio.
  • We use premium materials suited to Texas homes.
  • Transparent pricing—no hidden costs.
  • Emergency response after storms.

FAQs

1. How much does it cost to replace chimney flashing in Texas?
Between $300 and $1,200 depending on material and labor.

2. What’s the average cost to replace flashing around a chimney in 2025?
National average is $500–$1,000, with Texas costs in the same range.

3. Is it cheaper to repair or replace chimney flashing?
Minor repairs cost $150–$400, but full replacement is more reliable long-term.

4. Does homeowners insurance cover chimney flashing replacement in Texas?
If caused by storm or hail damage, yes. If due to age/wear, usually no.

5. How much does it cost to replace lead flashing on a chimney?
Typically $500–$1,500 depending on chimney size and labor rates.


Book Now Pete’s Builders

Replacing chimney flashing may not sound glamorous, but it’s one of the smartest investments you can make in protecting your Texas home. From Dallas storms to Houston humidity, flashing failures lead to costly water damage if ignored.

At Pete’s Builders, we provide affordable, professional chimney flashing replacement services across Texas. Whether you’re in Dallas, Fort Worth, Houston, Austin, or San Antonio, our licensed roofing team responds fast and delivers lasting results.

📞 Call us today at 214-997-6501 or book your inspection online. Don’t let a small leak turn into a major roof replacement—protect your home with Texas’s trusted roofing experts.

Leave a Reply

Your email address will not be published. Required fields are marked *